Standard-capacity 12.8V LiFePO4 batteries for heavy-duty off-grid and mobile applications.
Yes. With IP65 weather resistance, wide operating temperature range, and the ability to stay in parallel configurations, it works well for remote telecom shelters, agricultural watering networks, and hunting camp power systems that require reliable unattended operation.
The all-in-one BMS covers Over-Voltage Protection (OVP), Low-Voltage Protection (LVP), Over-Current Protection (OCP), Over-Temperature Protection (OTP), Low-Temperature Protection (LTP), and Short Circuit Protection — fully automated with no user intervention needed.
This series cuts weight by over 55%. A 100Ah LiFePO4 battery weighs roughly 10–12 kg versus 24–26 kg for an equivalent SLA battery — a major advantage for RV builders and mobile installers concerned with weight distribution.
3000+ deep cycles at 80% depth of discharge. With proper maintenance, this translates to 10+ years of reliable off-grid service — a clear upgrade over lead-acid which typically needs replacement every 2-3 years.
The casing is IP65 rated and described as “heavy-rain resistant.” Combined with corrosion-resistant copper terminals, it’s well-suited for marine house power — running refrigerators, lighting, and electronics on sailboats or cabin cruisers.
Yes. The 4P4S expandable architecture lets you connect units in series or parallel to scale up to 24V or 48V systems. For example, two 12V 200Ah batteries in series give you 24V 200Ah, perfect for larger solar installations.
This series is built for sustained high-current loads. It ranges from 50Ah to 400Ah with heavy-duty machined copper terminals that provide low-resistance conductivity and can handle the demands of RV appliances, large trolling motors, and whole-cabin solar setups without thermal issues.
